Production Products
Choke / Control Valves
Quarter-turn Inline Choke
INLINE DISC CHOKE / PRODUCTION & FLOWBACKQuarter-turn inline choke that uses MOV disc-type trim for accurate straight-through control. Diamond-lapped discs flat within two light bands seat for reliable shut-off, while differential pressure holds them together to steady flow and cut vibration. An open flow path passes large solids and a wiping action keeps the disc faces clean.
GO TO PRODUCT PAGE >
Download Product Data Sheet >
Highlights
- 5,000 PSI rating
- Quarter-turn MOV disc trim
- Solid tungsten carbide, ceramic, or stainless steel discs
- Pie, circular, or half-moon flow areas
- Diamond-lapped disc flatness (±0.00002")
- Replaceable outlet wear sleeve
- Threaded, flanged, butt-weld, or socket-weld connections
- Manual or actuated
Application
- Straight-through inline flow control
- Large-solids and abrasive service
- Accurate disc-style throttling
- Production and flowback operations
- Automated choke control
- Inline fit-up and retrofits
Three-quarter-turn Inline Choke
INLINE DISC CHOKE / SOUR & HIGH-TEMP SERVICEThree-quarter-turn inline choke that uses MOV disc-type trim for control. Diamond-lapped discs flat within two light bands seat for reliable shut-off, while differential pressure holds them together to steady flow and cut vibration. Its wider service range covers standard, NACE, high-temp and low-temp duty across multiple body materials.
GO TO PRODUCT PAGE >
Download Product Data Sheet >
Highlights
- 5,000 PSI rating, 1" and 2" sizes
- Three-quarter-turn MOV disc trim
- Standard, NACE, steam/high-temp, and low-temp service
- Carbon, alloy, or stainless steel body
- Solid tungsten carbide, ceramic, or stainless steel discs
- Pie, circular, or half-moon flow areas
- Replaceable outlet wear sleeve
- Threaded, flanged, butt-weld, or socket-weld connections
Application
- Straight-through inline flow control
- Large-solids and abrasive service
- Sour (NACE) and high/low-temperature service
- Finer disc-style throttling resolution
- Production and flowback operations
- Automated choke control
ANGLE PATTERN CHOKE / CONTROL VALVE
FLOW CONTROL / HIGH PRESSURE
High-performance choke and control valve designed for erosion-resistant flow control in wellhead and production systems. Built for durability and flexibility, it supports both manual and automated operation. Ideal for applications requiring reliable performance in severe service conditions.
GO TO PRODUCT PAGE >
Download Product Data Sheet >
Highlights
- Two- and three-inch sizes; ANSI 600-2500 connections
- BTE/BAP trim assemblies are interchangeable; top-entry design for quick manual-to-automated conversion
- Corrosion-resistant body materials: high-strength cast steel and 316 stainless steel
- Tungsten carbide or ceramic discs for extreme erosive service
- Staged pressure drops to inhibit freeze-up in natural gas service
- Replaceable body sleeve; multiple orifice sizes; optional tungsten carbide wear sleeves; optional sour gas sealing components
Application
- Gas and liquid wellhead flow control from basic manual to fully automated systems
- High-erosion production choke service requiring staged pressure drops
- Natural gas service where freeze-up prevention is required
- Actuated choke installations requiring low operating torque
INLINE CHOKE VALVE
COMPACT DESIGN / HIGH-PRESSURE FLOW CONTROL
Compact inline choke valve designed for controlling gas and liquid flow in high-pressure production systems. Built to handle erosive conditions, it delivers consistent flow regulation and long service life. Ideal for applications where space, reliability, and performance are critical.
GO TO PRODUCT PAGE >
Download Product Data Sheet >
Highlights
- One- and two-inch sizes; threaded or ANSI 600-1500 flanged connections
- Stellite (cobalt-chromium alloy) wear sleeve absorbs cavitation and pitting; directs flow back to pipe centerline
- A487 carbon steel, nickel aluminum bronze, or 316 SS body materials
- Tungsten carbide or ceramic discs for erosive service
Application
- Gas and liquid production flowline rate control
- Waterflood and CO2 injection rate management
- Surface production choke applications requiring erosion-resistant internals
ECONOMICAL ANGLE PATTERN CHOKE
COST-EFFECTIVE / STANDARD PRODUCTION SERVICE
Cost-effective angle pattern choke designed for dependable flow control in standard production applications. Built for durability and ease of use, it provides reliable performance without added complexity. Ideal for operations requiring a balance of performance and value.
GO TO PRODUCT PAGE >
Download Product Data Sheet >
Highlights
- Two-inch size; NPT connection; A487 4D alloy steel body for enhanced body strength
- Self-impinging flow path diverts erosive energy away from the valve body
- Pressure relief port ensures depressurized valve before disassembly for operator safety
- Standard ceramic discs for general service; tungsten carbide discs for erosive service
- Bonnets designed to accept actuator brackets; optional actuation kits available
- Optional tungsten carbide-lined port; gas blowdown line; automated line heater choke
Application
- Gas blowdown and line heater choke service
- Automated choke control requiring actuator-ready bonnet design
- General production flow control where economical construction and easy maintenance are priorities
Quarter-turn Angled Choke
ANGLED DISC CHOKE / PRODUCTION & FLOWBACKQuarter-turn angled choke that uses MOV disc-type trim for accurate flow control in an angled body. Diamond-lapped discs flat within two light bands seat for reliable shut-off, while differential pressure holds them together to steady flow and cut vibration. An open flow path passes large solids and a wiping action keeps the disc faces clean.
GO TO PRODUCT PAGE >
Download Product Data Sheet >
Highlights
- 285 to 5,000 PSI rating coverage
- Quarter-turn MOV disc trim
- Angled body design
- Solid tungsten carbide, ceramic, or stainless steel discs
- Disc sizes 1/4", 3/8", 1/2", 5/8", and 3/4"
- Pie, circular, or half-moon flow areas
- Diamond-lapped disc flatness (±0.00002")
- Threaded, flanged, butt-weld, or socket-weld connections
Application
- Angled-body flow control
- Large-solids and abrasive service
- Accurate disc-style throttling
- Production and flowback operations
- Automated choke control
- Wellhead and manifold installs
Plug & Cage Choke
PRODUCTION & INJECTIONPlug-and-cage choke that moves a stem-mounted plug axially through a ported cage to open flow area. Cage ports direct flow streams toward the center to neutralize forces, cut erosion and turbulence, and lower stem load. A pressure-balanced, self-flushing design with equal-percentage control gives high Cv and lower operating torque.
GO TO PRODUCT PAGE >
Download Product Data Sheet >
Highlights
- 2K to 15K API, ASME/ANSI to 1500#
- Sizes 1-13/16" to 4-1/16"
- Trim sizes .75 to 2.2
- Equal-percentage flow characteristic
- Pressure-balanced, self-flushing design
- Tungsten carbide trim for erosive service
- API/ANSI flanged, butt-weld, or hammer union ends
- Manual or actuated
Application
- High-Cv production and injection control
- Larger pressure-drop service
- Erosive and sand-laden flow
- Wells needing wide rangeability
- Automated choke control
- Lower-torque actuated installations
Plug & Cage Choke
BOLTED BONNET / PRODUCTION & INJECTIONBolted bonnet plug-and-cage choke that runs a stem-mounted plug through a ported cage to open flow area. The bolted bonnet supports a larger trim range while the pressure-balanced path cuts erosion, turbulence, and stem load. Equal-percentage control delivers high Cv and lower operating torque in high-demand service.
GO TO PRODUCT PAGE >
Download Product Data Sheet >
Highlights
- 2K to 15K API, ASME/ANSI to 1500#
- Bolted bonnet design
- Sizes 1-13/16" to 4-1/16"
- Trim sizes .75 to 3.2
- Equal-percentage flow characteristic
- Pressure-balanced, self-flushing design
- Tungsten carbide trim for erosive service
- API/ANSI flanged, butt-weld, or hammer union ends
Application
- High-Cv production and injection control
- Larger-trim and high-turndown duty
- Erosive and sand-laden flow
- Larger pressure-drop service
- Automated choke control
- Lower-torque actuated installations
- External Sleeve
External Sleeve Choke
HIGH-PRESSURE SERVICEExternal sleeve choke that pairs a ported cage and external sleeve in an angled body, in a 1" configuration. A higher liquid pressure recovery factor across a wider range of openings lowers cavitation and vibration risk while holding accurate control. The cage and sleeve are machined from solid tungsten carbide or stainless steel.
GO TO PRODUCT PAGE >
Download Product Data Sheet >
Highlights
- 1" configuration
- 5,000 to 15,000 PSI
- Trim sizes 0.75" through 3.2"
- Solid tungsten carbide or stainless steel cage and sleeve
- Higher liquid pressure recovery factor (F_L)
- Angled ported-cage body
- Threaded, flanged, butt-weld, or socket-weld connections
- Manual or actuated
Application
- High-pressure flow control
- Cavitation and vibration-prone service
- Erosive and high-velocity flow
- Production and injection lines
- Automated choke control
- Accurate control across wide openings
External Sleeve Choke
HIGH-PRESSURE SERVICEExternal sleeve choke that pairs a ported cage and external sleeve in an angled body, in a 2" configuration. A higher liquid pressure recovery factor across a wider range of openings lowers cavitation and vibration risk while holding accurate control. The cage and sleeve are machined from solid tungsten carbide or stainless steel.
GO TO PRODUCT PAGE >
Download Product Data Sheet >
Highlights
- 2" configuration
- 5,000 to 15,000 PSI
- Trim sizes 0.75" through 3.2"
- Solid tungsten carbide or stainless steel cage and sleeve
- Higher liquid pressure recovery factor (F_L)
- Angled ported-cage body
- Threaded, flanged, butt-weld, or socket-weld connections
- Manual or actuated
Application
- High-pressure flow control
- Cavitation and vibration-prone service
- Erosive and high-velocity flow
- Larger-bore production and injection lines
- Automated choke control
- Accurate control across wide openings
- Inline Disc
Gate Valves
THROUGH-CONDUIT GATE VALVE
FULL-BORE FLOW / LOW PRESSURE DROP
Through-conduit gate valve designed for unrestricted flow and reliable shutoff in oil and gas production systems. Built for durability in corrosive and erosive environments, it ensures consistent sealing performance. Ideal for applications requiring full-bore flow and minimal pressure loss.
GO TO PRODUCT PAGE >
Download Product Data Sheet >
Highlights
- Through-conduit, unrestricted bore; full-floating "T" nut seals positive at pressures as low as 50 psi
- One- to six-inch sizes; threaded or ANSI 600-1500 flanged connections
- ASTM A487 steel or nickel aluminum bronze body/bonnet
- Fully field-serviceable inline without body removal from the line
- Gas testing available; NACE MR0175 compliance available on request
Application
- Waterflood and CO2 gas injection operations
- Enhanced oil recovery production flow lines
- Standard water, oil, and gas production line service
- Wellhead and flow line applications in corrosive/erosive environments
DIAPHRAGM-ACTUATED GATE VALVE
AUTOMATIC SHUTOFF / FAIL-SAFE OPERATION
Diaphragm-actuated gate valve designed for automatic shutoff in critical wellhead and flowline applications. Built for reliability and simplified operation, it provides consistent fail-open or fail-closed performance. Ideal for systems requiring dependable safety and control.
GO TO PRODUCT PAGE >
Download Product Data Sheet >
Highlights
- All-in-one safety valve design minimizes safety system cost and complexity
- Bi-directional, reduced-port design; positive fail-open or fail-close operation
- Pneumatically actuated with optional mechanical override
- Threaded or flanged connections; API 5000 or ANSI 1500 pressure rating
- Durable seal construction for long service; simplified maintenance design
Application
- Wellhead wing valve and shutdown service
- Casing relief and blowdown systems
- Gas lift and dump valve applications
- Surface safety systems requiring automatic fail-safe operation
BPRs
2" TEE STYLE BPR
BACK PRESSURE REGULATOR / PRODUCTION & FLOWBACKBack pressure regulator designed to maintain stable system pressure in production service. An HNBR loaded seal eliminates the stem packing leaks common to older designs. Many spring ranges let the regulator be matched to the required setpoint.
GO TO PRODUCT PAGE >
Download Product Data Sheet >
Highlights
- 2000 PSI working pressure
- 2" LP connection
- HNBR loaded seal, no stem packing leaks
- Many spring ranges available
- Field repairable design
- Various trim options
Application
- Upstream pressure maintenance
- Separator and production backpressure
- Flowback and well testing
- Gas and liquid line backpressure
- Vapor recovery and tank battery service
3" TEE STYLE BPR
BACK PRESSURE REGULATOR / HIGH-VOLUME SERVICEHigher-capacity tee regulator built for larger production and flowline volumes. An HNBR loaded seal eliminates the stem packing leaks common to older designs. Many spring ranges let the regulator be matched to the required setpoint.
GO TO PRODUCT PAGE >
Download Product Data Sheet >
Highlights
- 3000 PSI working pressure
- 3" LP connection
- HNBR loaded seal, no stem packing leaks
- Many spring ranges available
- Field repairable design
- Various trim options
Application
- High-volume backpressure control
- Separator and production service
- Gathering and flowline pressure maintenance
- Gas and liquid line backpressure
- Vapor recovery and tank battery service
2" HAMMER UNION STYLE BPR
BACK PRESSURE REGULATOR / FRAC & FLOWBACKPatented hammer union regulator that speeds makeup and teardown in the field. It offers more spring ranges than the tee style and a higher working pressure. HNBR loaded seals and various trims handle demanding application issues.
GO TO PRODUCT PAGE >
Download Product Data Sheet >
Highlights
- Patented design
- 5000 PSI working pressure
- 2" LP connection
- HNBR loaded seal standard
- More spring ranges than tee style
- Fast hammer union makeup and teardown
- Various trim options
Application
- Frac and flowback operations
- High-pressure backpressure control
- Temporary and rig-up service
- Separator and production backpressure
- Vapor recovery and tank battery service
3" HAMMER UNION STYLE BPR
BACK PRESSURE REGULATOR / HIGH-VOLUME FLOWBACKPatented hammer union regulator that speeds makeup and teardown in the field. It offers more spring ranges than the tee style and a higher working pressure. HNBR loaded seals and various trims handle demanding application issues.
GO TO PRODUCT PAGE >
Download Product Data Sheet >
Highlights
- Patented design
- 5000 PSI working pressure
- 3" LP connection
- HNBR loaded seal standard
- More spring ranges than tee style
- Fast hammer union makeup and teardown
- Various trim options
Application
- High-pressure, high-volume flowback
- Frac and completion operations
- Temporary and rig-up backpressure control
- Separator and gathering service
- Vapor recovery and tank battery service
INLINE BPR
BACK PRESSURE REGULATOR / INLINE PIPINGStraight-through back pressure regulator suited to tight or inline piping runs on location. Its parts interchange with all 2" Superior Products BPRs to simplify service. HNBR loaded seals and various trims handle demanding application issues.
GO TO PRODUCT PAGE >
Download Product Data Sheet >
Highlights
- 5000 PSI working pressure
- 2" LP connection
- HNBR loaded seal standard
- Parts interchangeable with all 2" BPRs
- Straight-through inline body
- Various trim options
Application
- Inline pressure maintenance
- Compact and straight-run piping
- Production and flowback service
- Gas and liquid line backpressure
- Vapor recovery and tank battery service
EXTREME BPR
BACK PRESSURE REGULATOR / ABRASIVE & WASHOUT SERVICEExtreme-service BPR developed from field research to tackle washout and extend run time. A proprietary steel treatment hardens the cage and seat plug. It is offered across select hammer union, inline, and tee models to fit difficult well conditions.
GO TO PRODUCT PAGE >
Download Product Data Sheet >
Highlights
- Proprietary steel treatment, case hardness exceeding 2100HV
- Silicon nitride ball and seat trim option
- Sand trim plunger option
- Built to resist washout in abrasive service
- Longer service life between repairs
- Available in 2" HU, 2" Inline, 3" HU, and 3" Tee models
- HNBR loaded seal standard
- Made in USA
Application
- Abrasive and sand-laden production
- Difficult and high-washout well conditions
- High-solids flowback service
- Extended-run backpressure control
- Frac and completion operations
- Wells with a history of frequent BPR repair
EOR Products
INJECTION TEE
CHEMICAL INJECTION / WELLHEAD SYSTEMS
Injection tee designed to introduce water or chemical injection into production systems with minimal disruption. Built for durability and compatibility, it integrates seamlessly into high-pressure environments. Ideal for injection systems requiring reliable and consistent flow entry.
GO TO PRODUCT PAGE >
Download Product Data Sheet >
Highlights
- Designed for water and CO2 injection; works seamlessly with FET Gravity Ball Checks and In-Line Check Valves
- Multiple sizes available; FNPT x EUE pin connections
- Nickel aluminum bronze or 316 SS construction
- ANSI 600-1500 pressure rating
Application
- Water injection wellhead assemblies
- CO2 injection surface installations
- Waterflood injection trees requiring integrated check valve and swab valve access
Y STRAINER
DEBRIS FILTRATION / SYSTEM PROTECTION
Y strainer designed to remove debris and protect injection systems from contamination. Built for durability and easy maintenance, it helps maintain system performance and reduce downtime. Ideal for applications requiring clean, uninterrupted flow.
GO TO PRODUCT PAGE >
Download Product Data Sheet >
Highlights
- Blow-down port allows debris removal without shutting down the line
- One- and two-inch sizes; FNPT or ANSI 900/1500 flanged connections
- Nickel aluminum bronze or 316 SS body materials
- 316 SS filter screens; installed upstream of flow meters
Application
- Upstream of turbine flow meters in waterflood injection lines
- CO2 injection fluid filtration
- Injection assembly debris protection
GRAVITY BALL CHECK
SIMPLE DESIGN / RELIABLE BACKFLOW PREVENTIONGravity ball check valve designed to prevent backflow in injection systems and protect upstream equipment. Built for reliable, maintenance-friendly operation, it performs consistently in demanding environments. Ideal for applications requiring dependable backflow protection.
GO TO PRODUCT PAGE >
Download Product Data Sheet >
Highlights
- Stops backflow from tubing when tubing pressure exceeds injection line pressure
- O-ring sealed cap threads protected from line flow and corrosion
- One- and two-inch sizes; threaded, union, or socket weld connections
- ANSI 1500 pressure rating; nickel aluminum bronze or 316 SS construction
Application
- Waterflood injection tubing backflow prevention
- Inline with FET Injection Tees in surface injection assemblies
- CO2 injection backflow protection
O-RING UNION
LEAK-RESISTANT SEAL / INJECTION SYSTEM SERVICE
O-ring union designed for secure, leak-resistant connections in injection systems. Built for easy installation and maintenance, it allows quick disassembly without disturbing surrounding components. Ideal for applications requiring reliable sealing and serviceability.
GO TO PRODUCT PAGE >
Download Product Data Sheet >
Highlights
- Any assembly component removable or replaceable without full installation teardown
- Multiple sizes; FNPT or socket weld connections
- ANSI 1500 pressure rating; 316 SS construction
Application
- Waterflood and CO2 injection assembly plumbing connections
- Injection tree installations requiring routine component access and maintenance