P8750 | Liquid Level Controller
BelGAS CP Control Products
The BelGAS CP P8750 Liquid Level Controller is a low-pressure, pneumatically operated controller designed to monitor and control liquid levels in separators, treaters, and similar vessels. Built with a float and arm assembly, it delivers reliable on/off control based on changes in liquid level.
As illustrated in the operation diagram on page 3, rising liquid levels increase buoyancy on the float, causing the arm to rotate an internal stem and actuator assembly. This motion engages a pneumatic toggle, generating a clear output signal. As the level drops, the mechanism reverses, providing consistent switching between control states.
The P8750 features a no-bleed pneumatic valve design and adjustable control arms, allowing operators to fine-tune sensitivity and response for specific applications. Its rugged ductile iron body and stainless steel internals ensure long-term durability in demanding oil and gas environments.
Typical Applications:
Low-pressure separators, heater treaters, and vessels requiring liquid level monitoring
Key Features
- Pneumatically operated liquid level controller
- Float and arm mechanical sensing design
- No-bleed pneumatic valve operation
- Working pressure up to 500 PSIG
- Operating temperature range -20°F to 212°F
- Supply pressure: 100 PSI standard (250 PSI optional)
- Adjustable arm design for sensitivity control
- 4" grooved body mounting configuration
- 3.5" x 6" stainless steel float standard
- Ductile cast iron body with stainless steel internal components
- Fluorocarbon seals standard with optional nitrile
PERFORMANCE ADVANTAGES
Why the BelGAS CP P8750 Performs Where It Counts
RELIABLE LEVEL-BASED CONTROL
Float-actuated design provides consistent and repeatable switching based directly on liquid level changes.
NO-BLEED PNEUMATIC OPERATION
The valve design eliminates continuous bleed, reducing gas consumption and improving efficiency in field applications.
ADJUSTABLE CONTROL RESPONSE
Adjustable actuator arms allow operators to fine-tune sensitivity and switching points for different process conditions.
BUILT FOR FIELD DURABILITY
Ductile iron construction and stainless steel internals provide long service life in harsh oil and gas environments.
Not what you are looking?
Similar Products to the P8750
P8900 Level Indicator
Visual level indicator follows the liquid with an internal float and displays the level directly, without any signal output.
P8000 Trunnion Assembly
Hammer union and trunnion assembly mounts the level control float to the vessel and separates quickly for service access.
P8100 Liquid Level Controller
Liquid level controller senses level through an internal displacer and outputs a signal to operate the connected dump valve.
P8400 Electric Level Switch
Snap-acting level switch trips an electrical contact the moment a rising or falling float reaches
the setpoint level.
P8500 Pneumatic Controller
Pneumatic level controller senses level with an internal displacer and modulates a pneumatic output to hold the setpoint.
P8600 Pneumatic Level Switch
Snap-acting level switch releases a pneumatic signal the moment a rising or falling float reaches the setpoint level.
P8700 LP Level Controller
Low-pressure level controller senses level through a float and outputs a signal to operate the connected dump valve.