CC20 | EXTERNAL SLEEVE CHOKE
Cactus Flow Products
The Cactus Flow Products CC20 is a 2" external sleeve choke for accurate, high-pressure flow control. A ported cage pairs with an external sleeve in an angled body, opening and closing flow area as the sleeve strokes across the cage ports.
This arrangement delivers a higher liquid pressure recovery factor across a wide range of openings, lowering cavitation and vibration risk while holding precise control. The cage and sleeve are machined from solid tungsten carbide or stainless steel to resist erosive, high-velocity flow.
Rated 5,000 to 15,000 PSI, the CC20 takes threaded, flanged, butt-weld, or socket-weld ends. Trim sizes 0.75" through 3.2" match the flow coefficient in a larger bore than the CC10, and the choke is available manual or actuated.
Typical Applications:
High-pressure flow control, cavitation and vibration-prone service, erosive and high-velocity flow, larger-bore production and injection lines, and automated choke control.
Key Features
- 2" configuration
- 5,000 to 15,000 PSI
- Trim sizes 0.75" through 3.2"
- Angled ported-cage body
- External sleeve trim
- Higher liquid pressure recovery factor
- Solid tungsten carbide cage and sleeve option
- Stainless steel cage and sleeve option
- Accurate control across wide openings
- Reduced cavitation and vibration risk
- Erosion-resistant trim
- Threaded and flanged ends
- Butt-weld and socket-weld ends
- Reduced turbulence body design
- Manual or actuated
- Field-serviceable trim
PERFORMANCE ADVANTAGES
Why the CFP CC20 Choke Performs Where It Counts
HIGHER RECOVERY, LESS CAVITATION
The external sleeve and ported cage deliver a higher liquid pressure recovery factor across a wider range of openings. That lowers the risk of cavitation and the vibration and damage it causes, protecting the trim and the downstream line.
LARGER BORE FOR HIGHER FLOW
The 2" configuration carries higher flow volumes than the 1" CC10 while keeping the same recovery and control characteristics. That lets it serve larger-bore production and injection lines without stepping outside the family.
ACCURATE CONTROL UNDER PRESSURE
The sleeve-and-cage arrangement holds precise flow control across the full stroke, even at high differential pressure. Operators get repeatable throttling rather than the coarse steps of a simpler choke.
TRIM THAT SURVIVES EROSIVE FLOW
Solid tungsten carbide or stainless cage and sleeve components resist the wear of sand-laden, high-velocity flow. The angled body routes flow to keep erosion off the trim and body walls, extending service life.
Not the regulator you are looking?
Products Similar to the CC20
CMC Inline Disk Choke
Quarter-turn inline choke that uses MOV disc-type trim for accurate, straight-through flow control in abrasive service.
CMI20 Inline Disk Choke
Three-quarter-turn inline choke that uses MOV disc-type trim for accurate, straight-through flow across a wide service range.
CMA Angled Disc Choke
Quarter-turn angled choke that uses MOV disc-type trim for accurate flow control where an angled body fits the piping.
CLPB Plug & Cage
Plug-and-cage choke that moves a stem-mounted plug axially through a ported cage for precise, high-capacity flow control.
CLPBB Plug & Cage
Bolted bonnet plug-and-cage choke for high-capacity flow control where larger trim and easy access matter.
CC10 External Sleeve
1" external sleeve choke that pairs a ported cage and external sleeve in an angled body for accurate, high-pressure flow control.