2" HAMMER UNION STYLE BPR
Superior Products
The Superior Products 2" Hammer Union Style BPR is a patented back pressure regulator that speeds makeup and teardown in the field. The hammer union connection lets crews break and remake the valve quickly, and the design has been approved and specified by pumpers and producers across the oilpatch.
The patented design adds faster in-field repair, pressure settings held during repair, and a built-in safety factor. An HNBR loaded seal is standard, and the 2" HU offers higher spring ranges than the tee style for demanding service.
Rated at 5000# working pressure with a 2" NPT connection, the regulator covers spring ranges from 5-200 through 10-1500 PSI, plus higher 100-2500 and 100-5000 PSI ranges available only in the 2" HU. Stainless, carbide, sand, and silicon nitride trims and carbon, stainless, TBG-plated, heat-treated, or Extreme cage and seat plug options suit standard through abrasive service. Made in USA.
Typical Applications:
Frac and flowback operations, high-pressure backpressure control, temporary and rig-up service, separator and production backpressure, and vapor recovery and tank battery service.
Key Features
- Made in the USA
- 2" hammer union connection
- Patented design
- 5000# working pressure
- 2" NPT connection
- Spring ranges 5-200 to 10-1500 PSI
- Higher 100-2500 and 100-5000 PSI ranges (2" HU only)
- HNBR loaded seal standard
- Faster in-field, inline repair
- Maintains pressure settings during repair
- Built-in safety factor
- Stainless steel ball and seat standard
- Carbide, sand, and silicon nitride trim options
- Carbon, stainless, TBG-plated, or heat-treated cage and seat plug
- Extreme cage and seat plug option
- NACE-compliant materials available
PERFORMANCE ADVANTAGES
Why the Superior 2" Hammer Union Style BPR Performs Where It Counts
FAST MAKEUP AND TEARDOWN
The hammer union connection lets crews break and remake the valve quickly without unbolting a flange, cutting rig-up and service time. That speed is why the design is specified across the oilpatch for temporary and flowback work.
REPAIR WITHOUT LOSING THE SETTING
The patented design allows faster in-field, inline repair while maintaining the pressure setting through the repair. Crews get back in service quickly without re-dialing the regulator.
HIGHEST PRESSURE RANGES IN THE LINE
The 2" HU adds 100-2500 and 100-5000 PSI spring ranges not offered on other bodies, at 5000# working pressure. That makes it the choice for the highest-pressure backpressure control in the family.
BUILT-IN SAFETY AND SEALING
A built-in safety factor and the standard HNBR loaded seal deliver dependable, leak-free operation under demanding frac and flowback conditions. Extreme cage and seat plug options extend service life in abrasive, washout-prone flow.
Not the product you are looking?
Other Products by Superior Products
3" Tee Style BPR
Three-inch tee-style back pressure regulator that holds consistent upstream pressure by relieving excess flow through the tee body.
3" Hammer Union BPR
Three-inch back pressure regulator with a hammer union end for fast makeup, holding steady upstream pressure in the line.
Inline BPR
Inline back pressure regulator that installs directly in the run and holds steady upstream pressure without a separate tee body.
Extreme BPR
Heavy-duty back pressure regulator built for extreme pressures and abrasive service where standard regulators reach their limit.
Brass Gauge Cocks
Brass gauge cock that isolates and vents a gauge glass or column, allowing safe blowdown and glass replacement in service.
Carbon / Stainless Gauge Cocks
Carbon & stainless steel gauge cock that isolates and vents a gauge glass, rated for higher pressures and corrosive media.
Superior Drum Gauge
Boiler drum water gauge that gives a clear, direct reading of liquid level for safe monitoring of steam
drum operation.
ESG Series
Sealed gauge glass assembly that shields the sight glass from weather and contaminants for reliable outdoor level indication.
Gauge Glass
Transparent gauge glass that provides a direct visual reading of liquid level in tanks, columns,
and process vessels.
Gauge Guards
Protective gauge guard that shields the gauge glass from impact and accidental contact while keeping the level fully visible.
Stainless Steel Bleed Rings
Stainless steel bleed ring that installs between flanges to provide a tapped point for draining, venting, or sampling the line.
Carbon Steel Bleed Rings
Carbon steel bleed ring that installs between flanges to provide a tapped point for draining, venting, or sampling the line.
Spring Loaded Ball Checks
Spring-loaded ball check that seals automatically if the gauge glass fails, stopping flow and containing the process fluid safely.
Bird Cages
Bird cage guard that surrounds a tubular gauge glass with protective rods, shielding it from impact while keeping level visible.
2" Tee Style BPR
Two-inch tee-style back pressure regulator that holds consistent upstream pressure by relieving excess flow through the tee body.