INLINE BPR
Superior Products
The Superior Products Inline BPR is a straight-through back pressure regulator designed to use the same internal parts as a traditional BPR. That parts commonality lets any of the standard configurations and trim options be applied to fit specific well conditions, while the inline body suits tight and straight-run piping.
An HNBR loaded seal is standard, eliminating the stem packing leaks common to older designs. Because the internals interchange with all 2" Superior Products BPRs, service and inventory stay simple across the fleet.
Rated at 5000# working pressure with a 2" NPT connection, the regulator covers spring ranges from 5-200 through 10-1500 PSI. Stainless, carbide, sand, and silicon nitride trims and carbon, stainless, TBG-plated, heat-treated, or Extreme cage and seat plug options suit standard through abrasive service. Made in the USA.
Typical Applications:
Inline pressure maintenance, compact and straight-run piping, production and flowback service, gas and liquid line backpressure, and vapor recovery and tank battery service.
Key Features
- Made in the USA
- Straight-through inline body
- 5000# working pressure
- 2" NPT connection
- Spring ranges 5-200 to 10-1500 PSI
- HNBR loaded seal standard
- Parts interchangeable with all 2" BPRs
- Stainless steel ball and seat standard
- Carbide, sand, and silicon nitride trim options
- Carbon steel cage and seat plug standard
- Stainless steel cage and seat plug option
- TBG plated option
- Heat treated option
- Extreme cage and seat plug option
- Customizable to well conditions
- NACE-compliant materials available
PERFORMANCE ADVANTAGES
Why the Superior Inline BPR Performs Where It Counts
FITS TIGHT, STRAIGHT-RUN PIPING
The straight-through inline body maintains upstream pressure without adding a tee to the layout, fitting compact and inline installations. That simplifies piping where space is limited.
TRIM MATCHED TO THE SERVICE
Stainless, carbide, sand, and silicon nitride ball and seat options, paired with carbon, stainless, TBG-plated, heat-treated, or Extreme cage and seat plugs, tailor the regulator to standard or abrasive flow. One design covers a wide range of well conditions.
NO MORE STEM PACKING LEAKS
The standard HNBR loaded seal eliminates the stem packing leaks that plague conventional back pressure regulators. That means fewer callouts, less lost product, and a cleaner installation.
SHARES PARTS WITH THE 2" LINE
The internals interchange with all 2" Superior Products BPRs, so the same trim, seals, and configurations carry across the fleet. Service is faster and spare-parts inventory stays lean.
Not the product you are looking?
Other Products by Superior Products
Extreme BPR
Heavy-duty back pressure regulator built for extreme pressures and abrasive service where standard regulators reach their limit.
Brass Gauge Cocks
Brass gauge cock that isolates and vents a gauge glass or column, allowing safe blowdown and glass replacement in service.
Carbon / Stainless Gauge Cocks
Carbon & stainless steel gauge cock that isolates and vents a gauge glass, rated for higher pressures and corrosive media.
Superior Drum Gauge
Boiler drum water gauge that gives a clear, direct reading of liquid level for safe monitoring of steam
drum operation.
ESG Series
Sealed gauge glass assembly that shields the sight glass from weather and contaminants for reliable outdoor level indication.
Gauge Glass
Transparent gauge glass that provides a direct visual reading of liquid level in tanks, columns,
and process vessels.
Gauge Guards
Protective gauge guard that shields the gauge glass from impact and accidental contact while keeping the level fully visible.
Stainless Steel Bleed Rings
Stainless steel bleed ring that installs between flanges to provide a tapped point for draining, venting, or sampling the line.
Carbon Steel Bleed Rings
Carbon steel bleed ring that installs between flanges to provide a tapped point for draining, venting, or sampling the line.
Spring Loaded Ball Checks
Spring-loaded ball check that seals automatically if the gauge glass fails, stopping flow and containing the process fluid safely.
Bird Cages
Bird cage guard that surrounds a tubular gauge glass with protective rods, shielding it from impact while keeping level visible.
2" Tee Style BPR
Two-inch tee-style back pressure regulator that holds consistent upstream pressure by relieving excess flow through the tee body.
2" Hammer Union BPR
Two-inch back pressure regulator with a hammer union end for fast makeup, holding steady upstream pressure in the line.
3" Tee Style BPR
Three-inch tee-style back pressure regulator that holds consistent upstream pressure by relieving excess flow through the tee body.
3" Hammer Union BPR
Three-inch back pressure regulator with a hammer union end for fast makeup, holding steady upstream pressure in the line.