CAST STEEL VALVES - GATE,
GLOBE & CHECK
GWC USA
The GWC USA Forged Steel Gate, Globe & Check Valves are compact, high-integrity valves built to API 602 and ASME B16.34. Forged bodies give better material integrity than castings on small-bore lines, reducing internal defects and NDE requirements.
Gate and globe valves use an outside screw and yoke with a rising stem, available in bolted, welded, or pressure seal bonnet construction to match the service. Full and reduced port options set the flow capacity, with integral backseats for an ultimate seal during packing service.
Available in ASME Class 150 through 2500, the valves come in A105N, LF2, F11, F22, F5, F9, and F316 for carbon, alloy, and stainless service. Trim covers 13CR, 316 stainless, and stellite, with threaded, socket weld, butt weld, RF, and RTJ ends and NACE MR-01-75 construction available.
Typical Applications:
Stop and isolation service, throttling and control service, backflow prevention, steam and high-temperature lines, slurries and viscous fluids, and refinery and pipeline installations.
Key Features
- Gate, globe, and swing check patterns
- API 600 and 603, ASME B16.34
- Tested to API 598
- ASME Class 150 to 1500
- Outside screw and yoke, rising stem
- Flexible wedge gate
- Conical plug globe disc
- Low pressure drop swing check
- WCB, LCC, WC6, WC9, C5, C12, and CF8M bodies
- 13CR, 316SS, and stellite trim
- Forged or rolled one-piece seat rings
- Seal welded and overlaid seats
- Integral backseat on gate and globe
- RF flanged, ring joint, or butt-weld ends
- Carbon, alloy, and stainless service
- NACE MR-01-75 available
PERFORMANCE ADVANTAGES
Why the GWC Cast Steel Valves perform where it counts.
FLEXIBLE WEDGE FOR THERMAL SERVICE
The gate valve's flexible wedge lets the seating faces move independently and adjust to body distortion from line loads and thermal expansion. That prevents the sticking that seizes solid-wedge valves in steam and high-temperature service.
LOW-TURBULENCE THROTTLING CONTROL
The globe valve's full-ported spherical body with large radii keeps pressure drop, flow resistance, and turbulence to a minimum during throttling. That delivers controllable, repeatable regulation where a gate valve cannot throttle.
POSITIVE NON-RETURN PROTECTION
The swing check's closure design closes quickly and stays closed with no flow in runs, giving positive backflow protection at low pressure drop. That protects pumps and compressors without adding resistance to forward flow.
MATERIALS AND TRIM FOR SEVERE SERVICE
A broad body range from carbon through alloy and stainless, paired with stellite-overlaid trim, matches the valve to erosive, corrosive, and high-temperature conditions. NACE-compliant construction extends the family into sour service.
Not the product you are looking?
Other products from GWC USA
Forged Steel Valves
Forged steel gate, globe, and check valves built for strength in small-bore, high-pressure isolation and flow control service.
Flanged Floating Ball Valves
Floating ball valve with flanged ends whose ball shifts downstream under line pressure to seal tightly against the seat.
Oilfield Ball Valves
Rugged ball valves built for upstream oilfield service, delivering reliable on-off isolation across production and gathering.
Small-bore Floating Ball Valves
Small-bore floating ball valves with threaded or socket weld ends for tight, leak-resistant isolation in production piping.
API 6D Swing Check Valves
Swing check valves whose hinged disc opens with forward flow and swings shut to block reverse flow automatically now.
Bolted Body Trunnion
Trunnion-mounted ball valve with a bolted body and spring-loaded seats, allowing field service and reliable pipeline isolation.
Welded Body Trunnion
Trunnion-mounted ball valve with a fully welded body that removes potential body leak paths for buried and critical service.
Top Entry Trunnion
Top-entry trunnion ball valve whose one-piece body allows in-line inspection and repair without removing it from the pipeline.
Cryogenic Trunnion
Trunnion ball valve with an extended bonnet and stem that keeps the seal area warm for reliable service in cryogenic LNG.
Compact (Twin Ball) Trunnion
Twin-ball trunnion valve providing double block and bleed isolation within one compact body, saving weight and installed space.
Pressure Seal Valves
Gate, globe, and check valves with a pressure seal bonnet that tightens as pressure rises, suited to high-pressure steam service.